Copy startup config to tftp server software#

Enter the copy tftp running-config command. Use these steps to restore the running configuration from a TFTP server: To restore the running configuration or the startup configuration from a TFTP server, use either the copy tftp running-config or copy tftp startup-config command. Enter the name to assign to the configuration file. Enter the IP address of the host where the configuration file will be stored. Enter the copy running-config tftp command. (go the dos prompt, enter the following command 'TFTP 10.37.3.3 put a.bat. With the above config you should be able to put the files you want to serve in the /var/lib/tftpboot directory and then any client can access the files. 3) from the pc, attempt to send a file to the tftp server. 04: 34: 42 copy flash:686.rpm extension: Copy completed successfully.

Copy startup config to tftp server software#

1) Ping the router (this will work) 2) Ensure the TFTP software has been started and is running. Follow these steps to back up the running configuration to a TFTP server: Source File: Select Running, Startup, Backup config file or Flash Log Destination File Name: Provide a name of the file Ex: running config TFTP Server: Select. May I suggest that you do the following on the PC. To save the running configuration or the startup configuration to a TFTP server, use either the copy running-config tftp or copy startup-config tftp command as shown in the figure. A configuration file should also be included in the network documentation. Configuration files can be stored on a Trivial File Transfer Protocol (TFTP) server or a USB drive. Copies of configuration files should be stored as backup files in the event of a problem.